Best Clamp On Vise

Searching for the ideal Clamp On Vise can be quite a task, given the myriad of choices in the market. We get it – it’s both time-consuming and taxing. That’s exactly why we’re here – to simplify your quest and help you make a savvy purchase. This blog post presents a well-researched list of the premier Clamp On Vise we’ve handpicked for you. We’ve closely reviewed each product keeping an eye on their attributes, functionality, and consumer feedback. So, have peace of mind knowing that when it comes to Clamp On Vise, we’re providing you with nothing but the best.

Best Clamp On Vise

Bestseller No. 1
MYTEC Home Vise Clamp-On Vise, 3.0'
2,857 Reviews
MYTEC Home Vise Clamp-On Vise, 3.0"
  • HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch;
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove;
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end);
  • WIDE RANGE OF USES: This vise can hold a variety of parts,O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work;
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution.
Bestseller No. 2
Vise Universal Rotate 360° Work Clamp-on Vice Table Vise, 3'
929 Reviews
Vise Universal Rotate 360° Work Clamp-on Vice Table Vise, 3"
  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 3 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed.
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360° on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install.
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip; it lays a good foundation for your smooth completion.
Bestseller No. 3
Dual-Purpose Combined Universal Vise 360° Swivel Base Work, Bench Vise or Table Vise Clamp-On with Quick Adjustment, 3.3' Movable Home Vice for Woodworking
794 Reviews
Dual-Purpose Combined Universal Vise 360° Swivel Base Work, Bench Vise or Table Vise Clamp-On with Quick Adjustment, 3.3" Movable Home Vice for Woodworking
  • 🏆【Unique Multifunction】Not only can this vise be screwed firmly to the workbench or table with screws, but also it can also be conveniently clamped on the workbench. 🧐Pls Make sure only real shop is WideGx before adding it! Versatile and durable, this vise is perfect for a plethora of work surfaces.
  • ☝️【One-Click Position】Press on the quick release button, and push the jaws together to quickly position and clamp. No need to turn the screws to tighten! No worrying about machine accuracy deviation!
  • 👌【360° Rotation】Built with a 360 degree swivel base, this work bench vise is perfect for use with a variety of clamping angles for versatility. Smooth guide rail makes both the screw and handle use smooth and effortless.
  • ✌️【Universal Vise】Maximum opening of jaw is up to 2.5'', jaw width 3.3''. Base clamping range increased to 4'' for various thicknesses. Designed for home, workshop, professional use, general purpose and light work, and ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, and more!
  • 👍【High Quality】Made of high-grade cast steel - The surface is sprayed to enhance corrosion-resistance and to make it more smooth to the touch. The jaw is hardened and hammered to increase its hardness and strength, providing long-lasting durability and reliable grip.
Bestseller No. 4
Bench Vise, 4-1/2' Table Vise For Workbench,2-in-1 Multi-Purpose Heavy Duty Bench Vice With Multifunctional Soft Jaws, 270° Swivel Base Home Vise for Woodworking,Home Workshop,Welding and DIY
114 Reviews
Bench Vise, 4-1/2" Table Vise For Workbench,2-in-1 Multi-Purpose Heavy Duty Bench Vice With Multifunctional Soft Jaws, 270° Swivel Base Home Vise for Woodworking,Home Workshop,Welding and DIY
  • 【Data 】Vise weight 13 lb, the maximum of jaw 3.3 inch, Jaw width: 4.5 inch, the maximum of clamp workbench 2.3 inch.
  • 【 2 IN 1 】 The Bench Vise can be directly fixed to a table or workbench with the accompanying screws, or can be directly clamped to the workbench with the accompanying base, making it more flexible to use.
  • 【High Quality】The Heavy Duty Bench Vice is made of high-strength forged steel, which is sturdy, durable, and not easily damaged. The surface coating can effectively prevent rusting.
  • 【Widely Used】Table Vice can rotated 270°, and do not need to be punched to install on the edge of a 2.3-inch thick table. It is an ideal choice for some industries, such as Woodworking,craftsmen, model making , Electronic products,Welding and others.
  • 【Service】If you are not satisfied with the products, you can contact us at any time ,we will give you a satisfactory solution, If the product malfunctions during normal use, it will be replaced unconditionally within 3 years.
Bestseller No. 5
Wilton CBV-100, Super-Junior 4' Vise, 2-1/4' Jaw Opening, 2' Throat (63247)
252 Reviews
Wilton CBV-100, Super-Junior 4" Vise, 2-1/4" Jaw Opening, 2' Throat (63247)
  • Enclosed design keeps contaminants out and lubrication in for smooth operation
  • Top jaws are grooved and replaceable
  • Double lockdowns ensure stability
  • Rotates 45° left or right on base
  • Ideal for general purpose use and light tradesman
  • Backed by Wilton's industry-leading lifetime warranty against manufacturing defects
SaleBestseller No. 6
Yost Vises COV-3 Clamp-On Vise | 3 Inch Jaw Width Portable Vise | Made from Gray Iron Casting | Blue
974 Reviews
Yost Vises COV-3 Clamp-On Vise | 3 Inch Jaw Width Portable Vise | Made from Gray Iron Casting | Blue
  • PORTABLE VISE: The Yost Vises COV-3 3-inch Clamp-On Vise is made from 30,000 PSI Gray Iron Castings. It has a plated steel screw and handle and steel double guide rods. Capable of clamping up to 3/8 inch depth pipes.
  • TECHNICAL SPECS: Jaw Width 3" (7.62 cm), Jaw Opening 2.5" (6.35 cm), Throat Depth 1.625" (4.1275 cm).
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.
  • WARRANTY: Comes with a 1-year limited warranty and 90-day return.
Bestseller No. 7
Updated 2-In-1 Bench Vise or Table Vise 4.5 Inch, Clamp Vice for Workbench Constructed with Cast Steel, Heavy Duty Workbench Vise Swivel for Woodworking
91 Reviews
Updated 2-In-1 Bench Vise or Table Vise 4.5 Inch, Clamp Vice for Workbench Constructed with Cast Steel, Heavy Duty Workbench Vise Swivel for Woodworking
  • 【Multi-Purpose Vise】The heavy duty bench vice could be screwed firmly to the workbench or table with screws, and it can also be conveniently clamped on the workbench. Constructed with high-strength forged steel(60,000PSI), this vice can withstand high clamping pressure without breaking.
  • 【Versatile Jaw】4.5 inch vise adopts a pipe and flat jaw combination so that you easily hold circular pieces, such as tubes and pipes. The specially hardened and engraved jaws provide excellent grip and ensure long-lasting performance.
  • 【Premium Material】The surface is sprayed to enhance corrosion-resistance and to make it more smooth to the touch. With up to 5500 lbs. of clamping force, it's perfect for all your clamping needs. Perfect for both industrial and DIY home use.
  • 【270° Rotation】Built with a 270 degree swivel base, this work bench vise is perfect for use with a variety of clamping angles for versatility. Smooth guide rail makes both the screw and handle use smooth and effortless.
  • 【Universal Specs】Portable Workbench vise boasts a polished flat anvil. Maximum opening of jaw is up to 110mm(4.3"), jaw width 115mm(4.5") and 50mm(2") throat depth.
Bestseller No. 8
Dual-Purpose Bench Vise 3.3' Universal with Multifunctional jaw, 360° Swivel Clamps on Vise, Multi-functional Combined Vise with Quick Adjustment, Movable Home Vice for Woodworking
63 Reviews
Dual-Purpose Bench Vise 3.3" Universal with Multifunctional jaw, 360° Swivel Clamps on Vise, Multi-functional Combined Vise with Quick Adjustment, Movable Home Vice for Woodworking
  • 【UNIQUE FIXTURE GROOVED JAW】This table vise comes with a extra multi-functional jaws which add 10 screw holes and 4 clamping posts to help you handle delicate irregularities easily. The serrated jaws are also made of hardened steel for a more durable gripping surface.
  • 【HIGH QUALITY FORGED STEEL CONSTRUCTION】Made of industrial strength steel constructionwhich increases the durability and longevity. The surface is sprayed to enhance corrosion-resistance and to make it more smooth to the touch. Maximum opening of jaw is up to 2.79'', jaw width 3.2''.
  • 【360° SWIVEL CLAMPS-ON VISE】The swivel base of the vise can be rotated by 360 degrees for extra versatility, allows for optimal work placement and flexibility. Polishing lead screw and guide rail are upgraded to achieve high precision and high hardness.
  • 【DUAL-PURPOSE COMBINATION】This vise can be screwed firmly to the workbench or table with screws, it can also be conveniently clamped on the workbench as well. Base clamping range increases to 4 inch(100mm) , suitable for workbenches of various thicknesses, which is designed for home, workshop, professional use, general purpose and light work.
  • 【ONE-CLICK POSITION】Press on the quick release button, and push the jaws together to be quick position and clamp, no need to turn the screw to move slowly. Don’t worry about machine accuracy deviation!
SaleBestseller No. 9
Table Vise,2 in 1 Universal Rotate 360° Work Clamp-On Vise,Table Vice with Electric Drill/Grinder Holder for Woodworking, Drilling, Sawing, Jewelry Making,Metal Working and DIY (3'')
495 Reviews
Table Vise,2 in 1 Universal Rotate 360° Work Clamp-On Vise,Table Vice with Electric Drill/Grinder Holder for Woodworking, Drilling, Sawing, Jewelry Making,Metal Working and DIY (3'')
  • 【Data 】:Vise weight 2 lb, the maximum of jaw 2 inch, Jaw width: 3 inch, the maximum of clamp workbench 2.17 inch,Drill/Grinder Holder Range 0.97"-1.97".
  • 【Widely used】: Aluminum vise clamps can be tilted and rotated 360°, and do not need to be punched to install on the edge of a 2.17-inch thick table. It is an ideal choice for some industries, such as jewelry lovers, craftsmen, model making , Electronic products and others.
  • 【Anti-skid design】: the anti-skid texture on the inside of the jaws increases the clamping force of the jaws without sliding; Rubber covers will protect your product from injury,The overall design of pliers has laid a good foundation for the smooth completion of your work.
  • 【2 in 1】Switching between the two modes is simple and comes with the tools you need, which is very helpful for your work.
  • 【The best service】If you are not satisfied with the products, you can contact us at any time, we will give you a satisfactory solution.
Bestseller No. 10
IRWIN Woodworking Vise, 3-Inch (226303ZR)
1,677 Reviews
IRWIN Woodworking Vise, 3-Inch (226303ZR)
  • Easy clamp-on feature for working almost anywhere
  • Can attach to tables up to 2" thick
  • Anvil shaping horn incorporated into the design
  • Sturdy integrated pipe jaws keep the workpiece steady
  • 2" jaw capacity perfect for general purpose work

Leave a Reply

Your email address will not be published. Required fields are marked *