Best Kicker Motor Bracket

If your quest is to find the ultimate Kicker Motor Bracket, you’ve ended up at the right destination. We know how daunting it can get, wading through the sea of options flooding the market. Our mission is to alleviate your stress and aid you in making a well-versed choice. This blog post presents a carefully researched and compiled list of the elite Kicker Motor Bracket tailored for you. Each item has undergone rigorous evaluation revolving around its specifications, efficacy, and consumer sentiments. Therefore, be confident that you’re receiving the pick of the litter in the realm of Kicker Motor Bracket.

Best Kicker Motor Bracket

SaleBestseller No. 1
Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket - 10'
113 Reviews
Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket - 10"
  • Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions
  • The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts
  • Fit type: Universal
  • Handles up to 35 HP, 263 lbs. motors with 10" of travel
Bestseller No. 2
Five Oceans 316 Stainless Steel Adjustable 2 or 4-Stroke Outboard Motor Bracket, Max. 25 Hp, Max. 130 Lb, 11-Inch of Travel - Black Board - FO4205
11 Reviews
Five Oceans 316 Stainless Steel Adjustable 2 or 4-Stroke Outboard Motor Bracket, Max. 25 Hp, Max. 130 Lb, 11-Inch of Travel - Black Board - FO4205
  • SUITABLE - Adjustable Outboard Motor Bracket for Motors Up to 25 Hp with a maximium weight of up to 130 Lb. Vertical Travel: 11-Inch (279mm)
  • MARINE-GRADE - Made from 316 Stainless Steel (Base) and Black Polypropylene (Frame). Design to Resist the Condition of the Marine Environment
  • EASIER TO OPERATE - With 4 vertical running position lock bar to compensate for water surface and boat load conditions. Heavy-duty stainless steel torsion springs
  • TWIST LOCK SAFETY - Dual Twist lock safety knobs secure bracket in place. Mounting Hardware: Transom Plate Bolts are not included
  • MEASUREMENTS - Mounting Board: 10-1/4-Inch (260mm) x 7-1/2-Inch (190mm) - 1-3/8-Inch (35mm) Thick. Transom Plate: 4-3/8-Inch (112mm) x 4-7/8-Inch (124mm). FIVE OCEANS, 40 Years Developing High-Quality Marine & Outdoor Products
Bestseller No. 3
YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat, up to 25hp Auxilary Trolling Mount
122 Reviews
YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat, up to 25hp Auxilary Trolling Mount
  • Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs;
  • Specifications : Motor pad - 7.9"(20.1cm) wide, 6.3"(16cm) and 8.15"(20.7cm) two side length, 1.09"(4.3cm) thick, stainless nylock nuts (metric); Mounting bracket to transom - 5-3/4"(14.61cm) wide by 4-3/8"(11.11cm); Vertical Lift - 10.5"(26.67cm);
  • Applications : Fits most style of 2-stroke outboard motors; not recommended for 4-Stroke motors.
  • Easy to install : 5 vertical running position lock bars; locking the safety knobs to keep the bracket in place; holds the outboard motor up or lowers the motor down for propulsion; could mounts easily on nearly any transom;
  • Note : please be careful of the sharp edge when you install;Please feel free to contact us if you have any question about the product. We would try our best to solve any problem for you. Wish you have a good shopping experience.
Bestseller No. 4
PANTHER MARINE 55-0028 Fixed-Mount 4-Stroke Outboard Motor Bracket
55 Reviews
PANTHER MARINE 55-0028 Fixed-Mount 4-Stroke Outboard Motor Bracket
  • Works with two and four-stroke motors up to 35 HP and 263 lbs. maximum weight
  • Features a rugged polypropylene mounting board
  • Includes stainless steel mounting hardware and safety cable
  • Refer to manufacturer recommendations and guidelines to ensure proper installation procedures
Bestseller No. 5
2 Stroke Outboard Motor Bracket Kicker for Boat up to 20HP, Auxiliary Heavy Duty Marine Motor Bracket Max Load 20HP
40 Reviews
2 Stroke Outboard Motor Bracket Kicker for Boat up to 20HP, Auxiliary Heavy Duty Marine Motor Bracket Max Load 20HP
  • The whole is made of 304 stainless steel,Base is made of plastic.
  • Mounting size:4-7/16"* 5-11/16" , Roller size:8-1/4"*10-3/8", Hp rating: to 20hp.
  • Manual lifting required to raise and lower your motor.
  • Ideal for sailboats, powerboats, locks and holds motor up or down in two vertical running.
  • 1x motor bracket.
SaleBestseller No. 6
ISURE MARINE Boat Outboard Motor Brackets Kicker 7.5-20HP Stainless Steel Heavy Duty AdjustableTrolling Yacht
5 Reviews
ISURE MARINE Boat Outboard Motor Brackets Kicker 7.5-20HP Stainless Steel Heavy Duty AdjustableTrolling Yacht
  • ➤ Made of high-quality stainless steel, durable and not easy to rust. High-quality products provide you with quality assurance .
  • ➤100% Brand new high-quality outboard motor bracket, fully adjustable, 5 vertical operating positions lock rods to provide 5 stop positions.
  • ➤The maximum load-bearing capacity of 110 pounds allows them to be easily installed on almost any beam.
  • ➤The sturdy and design bracket, spring assisted action, can easily and quickly lift the auxiliary outboard outboard.
  • ➤You can trust its strength and stability, even in rough conditions where rudders may be prone to going out of control.
Bestseller No. 7
YaeMarine 7.5hp-20hp Heavy Duty Aluminium Marine Outboard Auxiliary Boat Motor Bracket(7953A)
86 Reviews
YaeMarine 7.5hp-20hp Heavy Duty Aluminium Marine Outboard Auxiliary Boat Motor Bracket(7953A)
  • Specifications : Board Area 260 x 205mm(10-1/4" x 8"), Mount area on boat 135 x 230mm (5-1/4" x 9"), Mount holes 8mm, Lift range 340mm (13-3/8");
  • Outboard motor bracket suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 52kg (115lbs), Ideal for small to medium sized powerboats and yachts;
  • Material: Anodised aluminium construction; Solid polypropylene mounting board;
  • Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options;
  • Note : You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.
Bestseller No. 8
Attwood Outboard Kicker Motor Steering Kit 11663-7
771 Reviews
Attwood Outboard Kicker Motor Steering Kit 11663-7
  • Steer your kicker motor with your steering wheel by connecting your primary outboard engine to your kicker motor
  • 24" zinc-plated rod is durable
  • Cut connector rod to size to customize fit
  • Quick disconnect assemblies make attachment and removal a breeze
  • Tilt either motor while attached
Bestseller No. 9
Hoffen Boat Outboard Motor Bracket, Aluminum Marine Boat Engine Surpport, Heavy Duty Outboard Motor Stand with White Mounting Plate
19 Reviews
Hoffen Boat Outboard Motor Bracket, Aluminum Marine Boat Engine Surpport, Heavy Duty Outboard Motor Stand with White Mounting Plate
  • Heavy Duty Boat Motor Bracket Suitable for 2-stroke Motors 7-1/2 HP to 20 HP,
  • Broad Size: 8" * 10.2" (205mm*260mm) Mounting Size 5.2” * 9” (132mm*230mm)
  • Supper corrosion and strong endurance, fit your motor perfectly
  • Stainless Steel Springs Counter-balance Motor Weight, Solid polypropylene mounting board
  • 5-position Locking Height Adjustment From 195mm-320mm
  • Package: 1* motor bracket (mouting hardware not included);Requires 8mm screws
Bestseller No. 10
HYDDNice 2 Stroke Stainless Steel Outboard Motor Bracket Up to 10 Hp Heavy Duty
8 Reviews
HYDDNice 2 Stroke Stainless Steel Outboard Motor Bracket Up to 10 Hp Heavy Duty
  • Motor pad is 8.5" x 10.5" x 1.75";Designed for motors up to 10HP or 80 lbs max weight.
  • Stainless steel construction is non-corrosive for saltwater use.
  • 14" travel Do not use with 4 stroke engine, Use safety cable.
  • Manual lifting required to raise and lower your motor.

Leave a Reply

Your email address will not be published. Required fields are marked *